¾«Ñ¡AV

Introductory course on general vehicle body maintenance, minor body part replacement and adjustment, glass replacement, and exterior and interior detailing.

Introduction to automotive systems, industry best practices, basic vehicle fluid and wheel services, and safety practices. Orientation to the automobile: technical vocabulary, systems, components, safety procedures, proper use of appropriate tools and equipment, and development of hands-on skills. Basic maintenance and repair of the automobile in accord with Automotive Service Excellence (ASE) certification.

This course prepares students to diagnose and repair automotive electrical systems. Includes specialized training in the use of electrical meters, scopes and electrical testing equipment. Preparation for the Automotive Service Excellence (ASE) A-6 test.

This course prepares students to diagnose and repair automotive brake and suspension systems. Includes specialized training in the use of Hunter alignment machines, tire mounting and road force tire balancing equipment. Preparation for the Automotive Service Excellence (ASE) A-4 and A-5 tests.

This course prepares students to diagnose and repair automotive manual and automatic transmission units. Includes specialized training in the use of specialized lifts and factory scantools. Preparation for the Automotive Service Excellence (ASE) A-2 and A-3 tests.

This course prepares students to diagnose and repair automotive engines. Includes specialized training in the use of specialized measuring devices and assembly equipment. Preparation for the Automotive Service Excellence (ASE) A-1 test.

This course prepares students to diagnose and repair automotive drivetrain control systems. Includes specialized training in the use of factory scan tools and electronic automotive diagnostic equipment. Preparation for the Automotive Service Excellence (ASE) A-8 and L1 tests.

Principles and functions of hybrid automobiles, and procedures for their maintenance, problem diagnosis and repair. Function of individual system components examined. Critical importance of safety and hybrid-unique equipment and procedures. Maintenance procedures and diagnostic and repair processes for common electrified vehicles (Toyota, Chevy, Nissan and Ford) taught in detail.

Learners will study the history, principles of operation, environmental concerns, scientific principles, mechanical components, diagnosis, servicing and testing, system controls, retrofit of old systems, and future trends of automotive HV AC systems. Preparation for Automotive Service Excellence (ASE) A-7 Test.

This course prepares students to diagnose and repair automotive tire, wheel, suspension and steering systems. Includes specialized training in the use of Hunter alignment, tire mounting and tire balancing equipment. Preparation for the Automotive Service Excellence (ASE) A-4 test.

This course prepares future technicians to perform automotive brake system repair with an
understanding of operation, troubleshooting, and preventive maintenance, including disk brakes, drum brakes, anti-lock, and stability control systems. Preparation for the ASE Brakes test (A-5 test)

Intermediate course to develop the skills necessary to cut, shape, weld, and fabricate various types of metal products from raw materials. Usage of MIG (Metal Inert Gas), TIG (Tungsten Inert Gas), gas welding, English Wheel, Power Hammer, and various other metal shaping equipment and techniques will be presented.

Prepares students for careers in diesel engine repair. Theory of operation and hands-on practice repairing diesel engines.
Preparation for the Automotive Service Excellence (ASE) A9 examination.

Subaru specific online and hands-on training to prepare students to repair Subaru vehicles.

This course prepares students to use factory scan tools to troubleshoot, diagnose, and repair next generation automobiles. In-depth study of factory scan tool use includes module scanning and reflashing.

Basic introduction to welding, metal bumping, metal finishing, and plastic filling. Students will learn analysis of minor body and fender damage and the sequential procedures involved in proper metal damage repair by integrating their classroom gained knowledge with shop practice.

This course concerns the methods and techniques of fastening and joining metal and plastic parts as they relate to a professional fit and finish on vehicle body and frame structures, including alignment of metal and plastic parts.

This course involves the various methods and techniques of repairing or cutting, fastening, and joining of metals and metal parts as they relate to vehicle body and frame structures, including plasma arc cutting, electric spot, MIG (Metal Inert Gas), gas welding, brazing, and epoxy-joining processes.

This course is designed as an introduction to automotive urethane, polyurethane and water based refinishing. It includes a comprehensive study of the materials, equipment, techniques and processes in the successful application of each of the automotive refinishing materials by integrating classroom gained knowledge with shop practice. This course is required for the Auto body Painting and Refinishing certificate.

This course concerns the study and repair of conventional and unitized vehicle frames, their straightening and alignment, alignment at cross members, rear and side frame members, suspension systems and steering principles. Frame straightening machines, gauges, and tools as well as appropriate safety will be covered.

In this course students will learn how to identify and work with different types of welding equipment used in the installation of welded panels. They will also learn various methods of welding, brazing, soldering and plasma arc cutting of thin auto body material.

This course concerns the techniques of repairing, replacing, and refinishing the many types of plastic and fiberglass parts now being used in auto body construction. Many plastics can be heated, reshaped, repaired and refinished using a variety of different methods.

A study of Occupational Safety and Health Administration requirements for the construction industry, leading to an ability to identify safety hazards and prevent accidents. Students who successfully complete the course with a "B" or better have the option to apply to the state for an OSHA 10 hour Construction Safety Certificate.

CAL-OSHA 30 training: Industry Standards for regulations covered by the Occupational Safety and Health Administration (OSHA) Standards for the Construction Industry.

Applied competency-based course designed to prepare students entering the construction, automotive, or custodial trades. Practical applications to trades math will prepare students for trades tests, success in content classes, and work in the field.

Overview of trades, design and management occupations connected to building projects. Introduction to use of project documents, plans and specifications. Introduces relevant green technologies in the construction field. Practice in using measuring, hand, and power tools. Hands-on use of tools and materials to complete group projects.

Overview of trades, design and management, occupations connected to building projects. Introduction to use of project documents, plans and specifications, as well as relevant green technologies in the construction field. Practice with measuring and using hand and power tools.

An introductory course in the methods and materials necessary to install a residential plumbing system. This course offers hands-on practice in the installation of supply, Drain/Waste/Vent (DWV), and gas systems.

This course teaches the skills for reading a variety of construction plans, details, schedules and specifications. The course is a beginning course, yet also enhances skills of those who have existing knowledge of construction drawings.

Principles for managing a construction business, California Contractor Licensing Law, worker's compensation, construction bonds, labor code, employee relations, safety, construction contracts, fiscal responsibility, scheduling, construction documents, plans, specifications, and the estimating process.

Introduction to basics of residential wiring practices which includes identifying required circuits, load calculations for a circuit and for a service, and the principles of grounding and bonding. The hands-on portion of the course includes best practices for the installation of energy efficiency devices and equipment, as well as the wiring and testing of such gear as heat pumps, occupancy sensors, mini splits and instantaneous water heaters.

An introductory course in the methods and materials necessary to build a wood framed building. This course offers hands-on practice in the framing of simple floors, walls, ceilings, roofs, and stairways.

An advanced course in the methods, materials and seismic requirements necessary to build a wood framed building. This course offers hands-on practice in the framing of more complicated floors, walls, ceilings, roofs, stairways and decks.

A course in the methods, materials, and installation techniques necessary to install doors, paneling, countertops, cabinets, crown moulding, baseboard, chair rail, picture rails and similar trim. This course offers hands-on practice in the fine craftsmanship required for finish work.

Introductory course in the basics of custom cabinetmaking and installation from simple "standalone" cabinets to complete wall-to-wall bookcases and kitchens, as well as stand-alone furniture-grade casework. Approaches and techniques of designing, constructing and installing custom casework including: Face-frame, European, and Die-wall construction; drawer making, associated material and hardware use.

Designed to prepare students for entry-level work or to upgrade their existing skills in woodworking. Course has a hands-on focus that covers safety procedures, furniture design, hand and machine tools, materials identification and applications, fabrication processes, and project planning.

Individualized project-based course designed for advanced-level students in furniture making, incorporating the furtherance of those skills (safety, project planning, design, hand and machine tools, materials knowledge) acquired in the basic CNST 116 course.

An individualized project-based course designed as a continuation of CNST 118A for advanced-level students in furniture making, incorporating the furtherance of those skills, emphasizing safety, project planning, design, hand and machine tools, and materials knowledge.

Introductory course in the techniques and applications of hanging, taping and applying smooth and textured finishes.

Basic principles and operation of industrial refrigeration systems; refrigeration cycle, Environmental Protection Agency (EPA) laws and regulations for safe refrigerant handling.

Fundamentals of electricity and magnetism as they apply to the training of refrigeration technicians. Hands on work with transformers, solenoids, relays, motor starters, and single and three phase hermetic motors and motor control circuits.

Introduction to basic electrical terms and principles. Includes the design, construction and testing of basic alternating currents (AC) and direct currents (DC) in series, parallel and combination circuits.

Applied competency-based course designed to prepare students entering the construction, automotive, or custodial trades. Practical applications to trades math will prepare students for trades tests, success in content classes, and work in the field.

This creative spray painting and custom graphics course introduces students to a process of transforming imagination into a unique vehicle appearance. This course is part of the motorcycle certificate series and a more advanced auto body painting and refinishing course.

This course provides entry to the motorcycle technician series. Overview of the history and culture of motorcycles, industry vocabulary and language, safety, tools, theory of operation, and the basic use of hand tools in shop-related projects and electronic diagnostic equipment. "Soft" skills of customer relations and "hard" skills of hands-on technical training.

This course covers the principles, theory of operation, design and functions of motorcycle, fuel, lubrication, frame, suspension, brakes and cooling systems including skills necessary for inspection, disassembly, cleaning, measuring and rebuilding the components and perform preventive maintenance, troubleshooting discrepancies, repairing system components and selecting after market parts.

This course builds on the basic maintenance learned in Moto 90, adding motorcycle tune-up, troubleshooting, and performance tuning; electrical principles and components; and generation, regulation, distribution, control, switching and testing of electrical systems. Learn many aspects of scheduled maintenance, troubleshooting, and repair problems associated with electronic ignition, fuel management, and on-board computer systems.

This course trains students in the theory of operation, troubleshooting, major overhaul, and general repairs of motorcycle engines and power trains.

Course in basics of bicycle and electric bicycle repair and maintenance. Students will learn how to perform maintenance such as repairing flat tires, adjusting derailleurs, chain maintenance, Basic electric system troubleshooting and safety inspection. Rebuilding of wheel, steerer, and bottom brackets bearings will be covered. Frame modifications, wheel-building/truing, and various electric bike services will also be covered. Emphasis on "hands on" implementation and practice.

This ¾«Ñ¡AV Custodial Supervisor Training Course covers aspects of managing two or more employees. Geared toward students who have been a custodian/janitor for two years or more and who want to get to the next level in their career.

Preparation for entry level employment as a custodian. Training in safety, use of tools, equipment, chemicals, materials and supplies, and the proper application of dusting, sweeping, mopping, use of ladders, scaffolds, various floor machines and specialized equipment.

Safety practices, procedures, tools, equipment and supplies required by a healthcare custodian (healthcare porter). Hands-on training in the methods and materials as they relate specifically to a healthcare environment and in topics covered on the civil service exam required for employment in San Francisco's medical centers. Preparation for custodial work in any medical office or nursing home.